Hanging Herb Holder | Free Crochet Pattern

Hanging Herb holder

Get a stunning PDF version of this pattern on Ravelry for only $1.00, or use these instructions on my blog today for free!

Hanging Herb Holders

Materials

Yarn: Bernat Handicrafter worsted weight cotton (12 oz/608 yards): 95 yards #9042 Cool Grey

Hook Size: H/8 (5.00 mm)

Gauge: 17 dc = 4″, 5 dc rows = 3.5″

Other Materials: 4-7″ high x 4-7″ wide flower pot, 2″ hook screw (to hang), plant of choice.

Pattern Key
Ch: Chain
Sc: Single crochet
Dc: Double crochet
Sl st: Slip stitch
Sts: Stitches / St: Stitch

Instructions

Make magic ring.

Round 1 (RS):  Ch 3 (counts as 1st dc, now and throughout), 11 dc in ring, sl st to join—12 dc.

Round 2:  Ch 3, dc in same st, 2 dc in each st around, sl st to join—24 dc.

Round 3:  Ch 3, dc in same st, dc in next st, *2 dc in next st, dc in next st; repeat from * around, sl st to join—36 dc.

Round 4:  Ch 3, dc in same st, dc in next 2 sts, *2 dc in next st, dc in next 2 sts; repeat from * around, sl st to join—48 dc.

Round 5:  Ch 3, dc in same st, dc in next 3 sts, *2 dc in next st, dc in next 3 sts; repeat from * around, sl st to join—60 dc.

Round 6:  Ch 10 (counts as 1st sc, ch-9), [skip 9 sts, sc in next, ch 9] 5 times, sl st in 1st ch to join—6 sc, 6 ch-9 spaces.

Round 7:  Ch 1 (counts as 1st sc), 9 sc in 1st ch-9 space, 10 sc in each ch-9 space around, sl st in 1st ch to join, sl st in next 4 sts—60 sc.

Round 8:  Repeat Round 6.

Round 9:  Repeat Round 7.

Round 10:  Ch 101, [skip 9 sts, sc in next, ch 100] 5 times, sl st in 1st ch to join—6 ch-100 spaces (hangers).

Fasten off and weave in ends.

Finishing

Assure long chains are neatly on sides, taking care not to tangle. Place plant into flower pot, then into herb holder. Gather 1 long ch at a time, until all 6 are held; adjust pot holder and plant as necessary. Assure 2” hook screw is securely in place and transfer all long chains onto hook.

Ribbed Pumpkin Cap | Free Crochet Pattern

Ribbed Pumpkin Cap

Materials

Yarn: Medium, weigh 4. Examples pictured with Vanna’s Choice by Lion Brand in Terracotta, Chocolate and Kelly Green. Tutorial made with Hobby Lobby I Love This Yarn in Burnt Pumpkin, Brown, and Mid Green.

Hook Size: H and I, or size needed for specified gauge

Gauge: 13 Dc Stitches = 4”, 2 Dc rows = 1”

Sizes: 

0-3 Months: 13″ x 4.5″, 6-12 Months: 16″ x 5.5″,  1-2 Years: 19″ x 6.5″

Pattern Key
Ch: Chain
Sc: Single crochet
Hdc: Half-Double crochet
Dc: Double crochet
Tc: Triple Crochet
Sl st: Slip stitch
Sts: Stitches / St: Stitch

Special Stitches

SDc: Spiked Double Crochet – Work double crochet St, except place this stitch 1 round below current position in round.

Fpdc: Front Post Double Crochet – Click for a video tutorial.

Instructions

0-3 Months

Round 1: (With Brown) form an adjustable ring, Ch 2 (first HDc),  work 9  HDc into ring, Sl St to join (10 HDc)

Round 2-3: Ch 1 (does not count as a st), HDc into each st around, Sl St to join (10 HDc)

Round 4: Ch 2 (first Dc),  Dc into same st, work 2 Dc into each st around, Sl St to join (20 Dc)

Round 5: (With Burnt Pumpkin) Ch 2 (first Dc),  SDc into same st, *Dc into next st, Dc and DDc into following st. Around from *, end row with 1 Dc after last SDc, Sl St to join (30 Dc)

Round 6: Ch 2 (first Dc), Fpdc around SDc from previous row, *Dc into following 3 Sts, Fpdc around SDc from previous row. Around from *, end row with 2 Dc after last Fpdc, Sl St to join (40 Dc)

Round 7, 9, 11: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *skip next st, Dc into following 3 Sts, Fpdc around Fpdc from previous row. Around from *, end row with 2 Dc after last Fpdc, Sl St to join (40 Dc)

Round 8, 10: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *Dc into first 3 Sts, skip 1 st, Fpdc around Fpdc from previous row. Around from *, end row with 2 Dc after last Fpdc, Sl St to join (40 Dc)

Round 12-13: Ch 1 (first Sc), Sc into each st around, Sl St to join, fasten after last round (40 Sc)

 

6-12 Months 

Round 1: (With Brown) form  adjustable ring, Ch 2 (first HDc),  work 9  HDc into ring, Sl St to join (10 HDc)

Round 2-3: Ch 1 (does not count as a st), work 1 HDc into each st around, Sl St to join (10 HDc)

Round 4: Ch 2 (first Dc), work 1 Dc into same st, work 2 Dc into each st around, Sl St to join (20 Dc)

Round 5: (With Burnt Pumpkin) Ch 2 (first Dc), SDc into same st, *Dc into next st, work Dc and SDc into following st. Around from *,  end row with 1 Dc after last SDc, Sl St to join (30 Dc)

Round 6: Ch 2 (first Dc), Fpdc around SDc from previous row, *Dc into following 3 Sts, Fpdc around SDc from previous row. Around from *,  end row with 2 Dc after last Fpdc, Sl St to join (40 Dc)

Round 7: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *Dc into following 4 Sts, Fpdc around Fpdc from previous row. Around from *,  end row with 3 Dc after last Fpdc, Sl St to join (50 Dc)

Round 8, 10, 12: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *skip next st, Dc into following 4 Sts, Fpdc around Fpdc from previous row. Around from *,  end row with 3 Dc after last Fpdc, Sl St to join (50 Dc)

Round 9, 11, 13: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *Dc into first 4 Sts, skip 1 st, Fpdc around Fpdc from previous row. Around from *,  end row with 3 Dc after last Fpdc, Sl St to join (50 Dc)

Round 14-15: Ch 1 (first Sc), Sc into each st around, Sl St to join, fasten after last round (50 Sc)

1-2 Years

Round 1: (With Brown) form an adjustable ring, Ch 2 (first HDc),  work 9  HDc into ring, Sl St to join (10 HDc)

Round 2-3: Ch 1 (does not count as a st),  1 HDc into each st around, Sl St to join (10 HDc)

Round 4: Ch 2 (first Dc), Dc into same st, work 2 Dc into each st around, Sl St to join (20 Dc)

Round 5: (With Burnt Pumpkin) Ch 2 (first Dc), SDc into same st, *Dc into next st, work Dc and SDc into following st. Around from *,  end row with 1 Dc after last SDc, Sl St to join (30 Dc)

Round 6: Ch 2 (first Dc), Fpdc around SDc from previous row, *Dc into following 3 Sts, Fpdc around SDc from previous row. Around from *,  end row with 2 Dc after last Fpdc, Sl St to join (40 Dc)

Round 7: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *Dc into following 4 Sts, Fpdc around Fpdc from previous row. Around from *,  end row with 3 Dc after last Fpdc, Sl St to join (50 Dc)

Round 8: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *Dc into following 5 Sts, Fpdc around Fpdc from previous row. Around from *,  end row with 4 Dc after last Fpdc, Sl St to join (60 Dc)

Round 9, 11, 13, 15: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *skip next st, Dc into following 5 Sts, Fpdc around Fpdc from previous row. Around from *,  end row with 4 Dc after last Fpdc, Sl St to join (60 Dc)

Round 10, 12, 14: Ch 2 (first Dc), Fpdc around Fpdc from previous row, *Dc into first 5 Sts, skip 1 st, Fpdc around Fpdc from previous row. Around from *, end row with 4 Dc after last Fpdc, Sl St to join (60 Dc)

Round 16-17: Ch 1 (first Sc), Sc into each st around, Sl St to join, fasten after last round (60 Sc)

Leaves and Vines (all sizes)

Leaf (Small)

1: (With Mid Green, and an H Hook) Leave a 4” tail (you will need this later), Ch 8, Sc into second Ch from hook, HDc into next two Sts, Dc into next st, work 2 Dc into next two Sts, Dc into last st then Ch 2 and connect with Sl St into same st.

2: (Turn to begin working on opposite / mirror side of Ch) Ch 2 and Dc into first st, work 2 Dc into next two Sts, Dc into next st, HDc into next two Sts, Sc into last st.

3: Ch 1 (do not turn work), Sl St across entire Left side of leaf, stop when work meets beginning tail, cut 4” tail and knot work.

Leaf (Large)

1: (With Mid Green, and an H Hook) Leave a 4” tail (you will need this later), Ch 10, Sc into second Ch from hook, HDc into next two Sts, Dc into next three Sts, work 2 Tc into next two Sts, Tc into last st then Ch 3 and connect with Sl St into same st.

2: (Turn to begin working on opposite / mirror side of Ch) Ch 3 and Tc into first st, work 2 Tc into next two Sts, Dc into next three Sts, HDc into next two Sts, Sc into last st.

3: Ch 1 (do not turn work) and Sl St across entire Left side of leaf, stop when work meets beginning tail, cut 4” tail and knot work.

Vine Small (Large) 

1: (With Mid Green, and an H Hook) Leave a 4” tail (you will need this later), Ch 16(26), work 2 Sc into second Ch from hook and each ch across. Cut a 4” tail, fasten.  (30 (50) Sc)

Finishing

Use tail ends from Leaves (Small and Large), and Vine (Small and Large) to fasten to hat. Position where desired, at Round 4 for all sizes.

 

Layered Flower With Leaves | Free Crochet Pattern

Layered Flower With Leaves

6 Petal Flower With Leaves | Free Crochet Pattern | Salena Baca Crochet

Materials

  • Yarn: Various yarn weights and types may be used to taste. Example pictured with Bernat Super Value in Magenta and Fern.
  • Hook Size: Use a hook size that best accompanies  yarn used.
  • Button: Optional; 1″ button with 2 holes used.
  • Felt: Optional; 1.5-2” circles,
  • Alligator Clip: Optional; 1.5-2” long

Gauge

Varies depending on yarn used. Example flower measures approximately 4″, leaves measure approximately 2.5″.

Pattern Key
Ch: Chain
Sc: Single crochet
Hdc: Half-Double crochet
Dc: Double crochet
Tc: Triple Crochet
Sl st: Slip stitch
Sts: Stitches / St: Stitch

Instructions

Round 1: (Right Side) Form a magic loop, Ch 1 (does not count as a st, here and throughout), work 12 hdc into ring, sl st to join  (12 hdc)

Round 2: Ch 1, sc, [ch 3, skip next st,  sc into following st] 5 times. Ch 3, sl st to connect to first sc to join (6 ch 3 spaces)

Round 3: Work the following into each ch 3 space around: sl st, ch 1, hdc, dc, hdc, ch 1, sl st. Sl St to first Sl St of round to join (6 petals formed; first layer complete)

Round 4: Working into wrong side of work, insert hook into  two loops  between each petal (picture 6), sc, Ch 4, then Work the following into each space between petals: sc, ch 4 (Picture 7). Sl st to first sc of round to join (6 ch 4 spaces made; picture 8)

Round 5: Work the following into each ch 4 space around: sl st, ch 1, hdc, 2dc, hdc, ch 1, sl st (Picture 9, picture 10). Sl St to first sl st of round to join (6 petals made; 2nd layer complete)

Round 6: Working into wrong  side of work, insert hook into  two loops between each petal (picture 11), sc, Ch 5, then Work the following into each space between petals: sc, ch 5 (Picture 12). Sl st to first sc of round to join (6 ch 5 spaces made)

Round 7: Work the following into each ch 5 space around: sl st, ch 1, hdc, 3dc, hdc, ch 1, sl st (Picture 13; 6 petals made, 3rd layer complete). Fasten, weave tail end toward beginning tail and knot together on wrong side to conceal (Picture 14).

Attaching Button: Cut 6” of yarn to thread button, pull each side of yarn in between hdc stitches from round 1 (Picture 15). Knot tail ends together fasten (picture 16), cut excess.

Leaves: (make 2)
Row 1: Leave a 3” tail, Ch 8,  work the following: Sl St, Sc, HDc, Dc, Dc, Tc, 2 Tc, Tc, Ch 3, Sl St to join into last St of row.
Row 2: Turn (work on opposite side of Ch), work the following: Ch 3, Tc, 2 Tc, Tc, Dc, Dc, HDc, Sc, Sl St.
Finishing: Ch 1, Sl St into each St across left side of leaf. When beginning tail is reached, cut a 3” tail, fasten. Using tails, fasten leaf to wrong side of flower.

Attaching Felt and Clip: Cut two pieces of felt no larger than the first two layers of flower. Cut the top of  1 piece of felt. Insert clip between both pieces of felt (as pictured). Use a hot glue gun to glue felt pieces together, then glue felt  to the back of your flower. Done!

 

Round or Pointed Flower | Free Crochet Pattern

Rounded Petal Flower Free Crochet Pattern Pointed Petal Flower Pattern Free Crochet Pattern

Rounded or Pointed Petal Flowers

These flowers can be used in lots of ways: sew or glue a clip on the back to make them detachable embellishments for hats, hair, bags, banners and more!

Materials
• Yarn: Examples shown in Lion Brand Cotton-Ease, or other WW4 yarn.
• Hook: H (5 mm)
Sizing: Measurements are approximate, actual subjects vary. This pattern can be made with nearly any weight or type of yarn to your taste! The flowers pictured, with materials suggested, measure approximately 3.5” each.

Pattern Key
• St / Sts: Stitch / Stitches
• Sl St: Slip Stitch
• Ch: Chain
• HDc: Half Double Crochet
• Dc: Double Crochet

Special Techniques
Magic Loop
3Dc Cluster
• Picot: Ch 3, Sl St into first Ch made.

Rounded Petal Flower

Round 1: Form a magic loop, Ch 1 (not a St), [3Dc cluster, Ch 2] 6 times. Sl St to beginning cluster to join. (18 Sts; 6 clusters + 6 Ch 2 spaces)

Round 2: Attach new color into any Ch 2 space around, Ch 1, (3 Dc, Ch 1, Sl St) into same Ch 2 space, [Sl St into following Ch 2 Space, (Ch 1, 3 Dc, Ch 1, Sl st) into the same Ch 2 space] 5 times. Sl St into beginning Ch 1 to join, fasten. (6 round petals formed)

Pointed Petal Flower

Round 1: Form a magic loop, Ch 1 (not a St), [3Dc cluster, Ch 2] 6 times. Sl St to beginning cluster to join. (18 Sts; 6 clusters + 6 Ch 2 spaces)

Round 2: Attach new color into any Ch 2 space around, Ch 1, (2 HDc, Picot, 2 HDc, Ch 1, Sl St) into same Ch 2 space, [Sl St into following Ch 2 Space, (Ch 1, 2 HDc, Picot, 2 HDc, Ch 1, Sl st) into the same Ch 2 space] 5 times. Sl St into beginning Ch 1 to join, fasten. (6 pointed picot petals formed)